7.3 Wet locations

fdsadfdsid

7.3 Wet locations
7.3.1 A device intended for use in wet locations and marked in accordance with Table 10.1, Item 11 or 12, shall:
适用于潮湿环境的设备，并按照表10.1中的第11或12项进行标记，应满足如下：【Table 10.1是各种标记要求列表】

a) Comply with the spacing requirements for wet locations or pollution degree 3 of Clause 6.6,
符合潮湿位置或污染程度3的间距要求

b) Have base contacts made of materials suitable for use in wet locations that comply with therequirements in Clause 6.1.2,
灯头触点是否由符合要求的适合在潮湿位置使用的材料制成

c) Have polymeric enclosures comply with the UV rating of Clause 5.3
聚合物外壳是否符合第5.3条的紫外线等级

d) Comply with the humidity test of Clause 8.13 if the device has accessible non-current carrying metal parts,
符合湿度测试

e) Comply with the water spray test of Clause 8.14, and
符合水喷测试

f) Comply with the cold impact test of Clause 8.15.
符合冷冲击测试